Industrial Quality Paints & Coatings for Metal

We manufacture premium Metal Coatings and offer other Best-in-Class products from market leaders in various Metal Paint fields.

Best Paint For Metal

At PROTEK PAINT we have a variety of paint solutions for Metal Surfaces manufactured to meet or exceed your expectations. Many of these Metal Coatings are manufactured in-house. PROTEK Paint also offers Metal Coatings from other manufacturers, who we believe, offer market-leading products.

Together, PROTEK Paint offers superior Metal Paint & Primer solutions available in the world marketplace today. PROTEK Paint can manufacture any quality requirements to suit customer needs.

We offer a full spectrum of paint & primer outdoor metal paint products, metal roof paint, metal door paint, metal fence paint, metal carport paint, waterproof paint for metal, and metal shed paint.

For Best Metal Paint Application Results

Start with an appropriate primer or rust converter for the substrate (base coat) as condition dictates. Contact the Pros’ at Protek to review your options.

Protek Metal Paints

Product Application

Product Details

Urethane Re-Enforced Rust Inhibiting Enamels:

The objective is to deliver high-quality corrosion inhibiting enamels with a strong gloss finish.

Metal Railings, Metal Sheds, & Metal Barns.

Equipment that would need protection from the weather and requites a corrosion resistant coating.

Coated items gain corrosion resistance.

Provides additional maintenance life on valuable metal surfaces and has a high-class finish.*

Direct-to-Metal (DTM) Styrene Acrylic (Water-Based):

Has very good gloss retention and a high gloss for a water-based coating.

Not for use on pitted or rusted steel.

This product is used on clean aluminum, galvanized and previously painted surfaces for exterior applications.

Can be applied directly to surfaces free of corrosion.

These coatings can be applied directly over clean and properly prepared corrosion-free metal surfaces, including exterior surfaces.**

Quick Dry Alkyd’s

Protek Shield

Truck/Trailer maintenance, Industrial maintenance & manufacturing.

Protect your trailer or industrial equipment for years to come.

Provides exceptional protection that is resistant to chemicals.

Can add catalysts for additional gloss & retention, flexibility, abrasion resistance, corrosion & chemical resistance.**

Moisture Cure Urethane

Aromatic & Aliphatic
Clear Satin and Gloss

Both Aromatic & Aliphatic Resins

These products provide excellent adhesion; scratch, moisture & chemical resistance; and wears well due to high solids.

Floor coatings that offer more chemical resistance.

Contain 60 to 100% solids for high traffic areas in commercial/retail stores, restaurants and industrial applications.**

Two-Component Urethane

Anti-Graffiti Coating
Water-based & Solvent Versions

Industrial strength colour retention, chemical resistance and flexibility.

offers strong wear resistance and flexes with any abrasion.

An architectural protective coating.

For industrial and commercial applications resistant to most solvent attacks.**

Ocean Fire Retardant

This epoxy paint is manufactured by PROTEK and formulated to meet military specifications and carries Underwriters Laboratories certification for flame retardant products.

For heavy industrial use.

Mines, oil platforms, manufacturing lines, naval & marine vessels, military & commercial aircraft, off-shore drilling rigs, fuel tanks and storage vessels.

Fireproof paint is an ideal coating for aluminum, sheet metal, structural steel, plaster, and metal.

It dries to a smooth semi-gloss finish that is highly durable and resistant to most chemicals.

*8 premixed High Gloss colours available off the shelf + Custom in High Gloss or Semi-Gloss.
**Custom Colours: 3 bases that can make a large array of custom colours using Universal colourants.

   Professional Tip

Clients can request custom manufactured colours to meet the demands of a production colour request in High Gloss or Semi-Gloss, Satin.

Protek Metal Primer Solutions

Our Water-Based Epoxy Ester Primer offers excellent adhesion and superior corrosion resistance.  It is available in Red Oxide or a White base that can be tinted to variety of colours. Used primarily in Industrial environments and production for superior performance and results. Other applications include building maintenance or homeowner uses.

Protek Metal Primers

Product Application

Product Details

Blue Steel Rust Convertor

Primer Base

Used on sound rusted surfaces from Rail Lines & Public transportation.

(Monorails, Train Rails and Subways), Oil Rigs, Industrial applications, Steel Railings, Metal Buildings, Barns, and Sheds.

Provides long term protection of the metal.

Converts rusted surfaces to a hard Bluish/Black substrate that then can be coated over successfully. It will convert the rust to a hard, stable substrate, with no more rust with two applications.

Pro-Stick-Tek Primer:

This product is offered as two main types: Clear and White base.

For use over various types of metal surfaces.

Both are used over Galvanized Metal, Aluminum Siding and previously coated metal surfaces.

The white base can be tinted to assist the topcoat.

Clear is commonly used over similar colors or dark colors where the top coated is another dark colour.

Grey Alkyd Oxide primer

Quick Dry Corrosion Resistant for properly prepared surfaces

Offers resistance to corrosion that can damage your metal surfaces.

Quick Dry primer used primarily for Industrial and Maintenance needs. Allow to air dry.

This quick-dry primer has some household applications.

Provides a smooth surface to protect your metal and limit sanding before paint application.

Red Alkyd Oxide primer

For properly prepared surfaces

Use to prepare metal surfaces before applying paint.

Typically used for industrial applications as a maintenance application.

This primer dries slow and softer due to the high solids.

Corrosion inhibitors are added to give extra protection. Some residential applications.

Zinc Rich Alkyd

Zinc Rich Alkyd consists of 86% Zinc in an Alkyd Resin

This is used for corroded surfaces or properly prepared metal surfaces.

Provides a self-sacrificing coating to protect the structure and your investment.

This coating prevents iron from losing its electrons and becoming oxidized.

Zinc is a sacrificial metal, which is more reactive than iron and losses its electrons in preference to iron.

Metal Building Paint

Protek Paint manufacturers an Aluminum exterior VOC compliant paints that are typically used on metal roofs, railings and other metal surfaces. It is rust inhibiting and has a brilliant sheen. Protek’s Blue Steel Primer can be used over rusty surfaces.

  • Moisture Cure Urethane
  • Direct to Metal (DTM) Styrene Acrylic
  • 100% Acrylic with Pro-stick Tek primer
  • Anti-Graffiti Coating

PPG – Two Part Epoxy: PITT-GUARD 95-245 Series

Heavy Industrial applications requires the very best and PITT-GUARD 95-245 Series is a Rapid Coat Direct-to-Rust Epoxy Coating that fits the bill. It can be used for interior or exterior applications to provide a barrier coating for; Steel, Hot Dipped Galvanized Steel, Aluminum and some Masonry surfaces.

Sure Tred – Solvent Based

Non-slip floor paint SURE TRED is a solvent-based coating for concrete in off the shelf greys and black. The finish is glossy, but the coarse aggregate makes the finish look less glossy.

Protek Step – Acrylic Based

Water-Based Epoxy Modified Acrylic typically for split resistance on high foot traffic floors. Used in manufacturing plants, on stairs, entrances and tennis courts.

Intershield 852 Epoxy Non-Skid

Non-slip floor paint SURE TRED is a solvent-based coating for concrete in off the shelf greys and black. The finish is glossy, but the coarse aggregate makes the finish look less glossy.

Intershield 6LV LSA-High Solids Epoxy Non-skid Deck Coating

Water-Based Epoxy Modified Acrylic typically for split resistance on high foot traffic floors. Used in manufacturing plants, on stairs, entrances and tennis courts.

Marine Quality Paint For Metal Industrial Applications

Marine quality coatings deliver anticorrosive and sometimes fire protection, for Asset protection purposes in large scale industrial operations, such as; Marine, Oil & Gas, Mining, Power Generation, Construction, Chemical Industry, & Water Protection.

Shop Primers

Interplate 937 Zinc Silicate Shop Primer

A zinc silicate shop pre-construction primer that protects against corrosion up to 1472°F. Comes in 2-pack and produces minimal zinc salts.

Resists damage caused by gas cutting, fairing, and welding, reducing secondary surface preparation requirements, unlike other zinc silicate products. Superior welding and cutting properties.

Usage:
For use in protection of steel during fabrication and assembly. A shop pre-construction primer that can be used with controlled cathodic protection.

Interplate 997 Zinc Silicate Shop Primer

A zinc silicate shop pre-construction primer that protects against corrosion up to 1472°F and produces minimal zinc salts. Comes in 2-pack.

Reduces preparation requirements, unlike other zinc silicate products. Resists damage caused by high-speed welding, fairing, and gas cutting.

Usage:
For use in protection of steel during fabrication and assembly. A shop pre-construction primer that can be used with controlled cathodic protection.

Interplate 855 Zinc Silicate Shop Primer

A zinc silicate shop pre-construction primer that protects against corrosion up to 1472°F. Comes in 2-pack.

Offers control over secondary surface preparation requirements, can be used in fast welding processes. Resists damage caused by gas cutting, fairing, and welding.

Usage:
For use in protection of steel during fabrication and assembly. A shop pre-construction primer that can be used with controlled cathodic protection.

Intergard 292 Waterborne Epoxy Preconstruction Primer

Low VOC, low odor epoxy pre-construction primer. Comes in 2-pack.

Used for protection of steel during assembly and fabrication. A pre-construction primer offering weather protection.

Usage:
Compatible with a wide range of generic topcoats. Offers good cutting and welding performance.

Interplate Zero Water Based Inorganic Shop Primer

A water-based heat resistant pre-construction primer. Comes in 2-pack.

Offers control over secondary surface preparation requirements, for use in fast welding processes. Resists corrosion and damage caused by gas cutting, fairing, and welding.

Usage:
For use in controlled cathodic protection. A pre-construction primer for protection of steel during assembly and fabrication.

Universal Primers

Intershield 300

Aluminum pigment pure epoxy coating with low-temperature application capability and anticorrosive protection.

A light coloured universal primer with superior edge retention and abrasion resistance.

Usage:
Can be used in controlled cathodic protection and applied directly to properly prepared bare steel or a mechanically prepared shop primer.

Intergard 7600 Pure Epoxy Universal Primer

Suitable for all vessel areas such as cargo oil tanks and cargo hull. Superior anti-corrosive properties and applications down to -5°C (41 °F).

Anticorrosive properties and low-temperature application make this pure epoxy universal primer exceptional.

Usage:
Can be used in controlled cathodic protection and applied directly to a mechanically prepared shop primer.

Intershield One-2-One Epoxy Primer

A (<340 g/l) Pure epoxy surface tolerant primer featuring low-temperature application, used as an anticorrosive touch-up coating.

A red epoxy for onboard maintenance with an equal mix ratio to reduce waste from mixing. Comes in 2-pack.

Usage:
An anti-corrosive primer that can be used in controlled cathodic protection and onboard maintenance.

Intershield 300V Abrasion Resistant Aluminum Pure Epoxy

A <340g/l VOC aluminum pure epoxy coating with low temperature application capability, abrasion resistance and anticorrosive protection.

A light coloured universal primer that can be applied directly to properly prepared bare steel or a mechanically prepared shop primer.

Usage:
Can be used in controlled cathodic protection and coat tanks approved for carriage of potable.

High Performance Deck Coatings

Intershield 851 Epoxy Non-Skid

A spray, high build epoxy coating with a coarse texture for nonslip finishes.

Hardy with good chemical resistance, comes in 2 pack. Complies with DEF STAN 80-134 Type 2 – Coarse Texture.

Usage:
A non-slip coating for flight decks or other walkway surfaces.

Intershield 852 Epoxy Non-Skid

A spray, high build epoxy coating with a medium texture for non-slip finishes.

Hardy with good chemical resistance, comes in 2 pack. Complies with DEF STAN 80-134 Type 1 – Medium Texture.

Usage:
A non-slip coating for flight decks or other walkway surfaces.

Intershield 6LV LSA-High Solids Epoxy Non-skid Deck Coating

A high solids, low solar absorbing epoxy coating for non-slip finishes.

A rollable and durable coating that complies with MILPRF-24667B Type I, II & V, Composition L.

Usage:
Used for maintenance and repair of decks or onboard maintenance.

Potable Water Tank Coatings

Interline 925 Solvent Free Epoxy Tank Coating

A high-performance pure epoxy coating approved for potable water tanks.

This epoxy coating is light coloured, solvent-free and used in wet spaces.

Usage:
To be used in tank coatings, cofferdams, void spaces, and ballast tanks.

Interline 850 Epoxy Phenolic Tank Coating

A high solids, epoxy phenolic coating.

Approved for potable water tanks.

Usage:
Used for tank coatings as well as maintenance & repair.

Interline 975P Epoxy Tank Coating

A high-performance, solvent free epoxy tank coating.

Approved for portable water tank coating certified to NSF/ANSI Standard 61. Comes in 2 pack.

Usage:
To be used in tank coatings, cofferdams, liquid mud tanks, and void spaces.

Cosmetic Finishes

Interlac 665 Alkyd Finish

An alkyd non-waterproof gloss finish.

For use as an easily maintained cosmetic finish coat on areas above the waterline.

Usage:
To be used as an easily maintained cometic finish above the waterline.

Interthane 990HS Low VOC Polyurethane Finish

A low-VOC polyurethane finish with superior resistance to intense weathering.

Chemical and solvent resistant with a high-gloss finish. Comes in 2 pack.

Usage:
To be used as an easily maintained cometic finish above the waterline.

Interlac 1 Silicone Alkyd Anti Stain Finish

A high-performance, easy-clean, high-solids silicone alkyd finish. Special active pigment will highlight corroded areas for repair as well as minimize rust stain.

Provides low-heat absorption compared to silicone alkyd finishes. Low solar absorption (LSA) pigmentation. Comes in one pack.

Usage:
For use on deck fittings, superstructures and topsides. Offering superior gloss and colour retention.

Other Manufacturer Products

We distribute include solutions from; Sheffield Bronze, PPG Industrial Line, Mibenco and Krylon. These solutions are for everything from store fixtures, furniture, industrial purposes and other decorative surfaces whether they are wood, gloss or metal.

Heat Resistant Paint For Metal

PROTEK Paint currently manufactures custom colours that meet high-temperature needs. Please reach out to us to meet your customized needs. PROTEK Paint sells a variety of product offerings from other quality manufacturers, such as Sheffield Bronze and Krylon.

Sheffield has proven Black (Pot Belly Black) and Aluminium or Silver (Red Hot Aluminium) that are sold for extreme temperatures. Krylon offers solutions with their spray cans typically used on Barbeques and small equipment needs.

Please ask us if you have any special need and our team at Protek Paint would be happy to try to help to meet your needs and requirements.

Pot Belly Black

This Sheffield Bronze product is a siliconized flat black paint, heat resistant to 1000° Fahrenheit; best for grills, stoves, and other surfaces. PROTEK Paint partnered with Sheffield Bronze to sell their quality product to meet this need for our customers.

Red Hot Aluminum: Good to 1,600 F

High Heat Aluminum & Flat Black coatings are for surfaces that can reach up to 1600F. Typically used on metal surfaces such as: wood burning stoves, barbecues and industrial purposes that are looking for a heat resistant coating that can have good durability. Sheffield Bronze has been a quality family-based company and manufacturer for the past 90 years.

Best Spray Paint For Metal

PROTEK Paint manufacturers a line of Professional fast dry alkyds that are available in a variety of colours and custom colours. This line of alkyd’s are quality paints that have excellent adhesion to metal and offers excellent corrosion resistance, as well.

PROTEK Paint finishes are professional finishes that are sprayed through conventional spray equipment, such as pressure pots and pump systems. Commonly these paints for metals are used on truck and trailers, farm implements, equipment, fences and any other maintenance requirements.

  • PROTEK Paint also has an exclusive distribution deal with MIBENCO, which is a unique liquid rubber can spray on finish for Metal available in Gloss or Matte for both Motorcycles or Car parts, especially the rims.
  • PROTEK Paint also has offerings from KRYLON with their line of spray paint cans for metal surfaces. Spray paint available in cans are offered by PROTEK Paint in products manufactured by both KRYLON or MIBENCO.

The Snap & Spray clips on to the top of your spray can and transforms it into a spray gun.

This reduces finger fatigue, improves accuracy and control.

MIBENCO

Suitable for use in any environment, indoor or outdoor, mibenco® liquid rubber can help you customize your fixtures and maintain and improve the visual appeal. From stunning details on tire rims and chrome, to full body paint effects, mibenco® works its magic on vehicles of any size, make, and model to create a unique expression of your style. Industrial applications are astounding.

Easily Removable

Full Car Body

Chameleon or Flip

Metallic

Pastel

Gloss or Matte Fabulous colours

Industrial applications

More durable than many paint products, mibenco® liquid rubber can be modified to suit your production needs. From waterproofing circuit boards to adding grip to tools mibenco® has you covered.

Dry to touch: 10 minutes or less
Dry to handle: 1 hour
Recoat Window: Within 4 hours or after 24 hours
Coverage: Up to 25 sq. ft. per can
Application Conditions: Best results when temperatures are 55° F to 75°F and humidity is below 60%. Applying outside this range may impact the mibenco®finish.

Dry to touch: 10 minutes or less
Dry to handle: 1 hour
Recoat Window: Within 4 hours or after 24 hours
Coverage: Up to 25 sq. ft. per can
Application Conditions: Best results when temperatures are 55° F to 75°F and humidity is below 60%. Applying outside this range may impact the mibenco®finish.

KRYLON Spray Paints

PROTEK Paint is a distributor of KRYLON Spray paints. We carry KRYLONS’ brands under the names COLOR WORKS (for Metallics) and ACRYLI-QUIK (previously known as “5 Ball”, for many dozens of colours), which is an Acrylic